Short hard X-ray pulses produced terahertz emission by mixing different parts of the X-ray beam’s spectrum.
The team directed 10-femtosecond, 10-keV X-ray pulses from a free-electron laser at a 100-micrometre-thick zinc telluride crystal. They detected terahertz emission arising when different spectral components within each X-ray pulse mixed in the material.
The emission’s polarization and angle dependence indicated that the process involved two forms of X-ray difference-frequency generation, including one that can occur in materials with inversion symmetry. The results show that X-ray pulses can produce a rapidly changing nonlinear polarization in solids and provide a way to study these interactions.
What the X-rays produced
The researchers detected terahertz waves generated when hard X-ray pulses interacted with zinc telluride, providing experimental evidence for X-ray difference-frequency generation. This process is a second-order nonlinear optical interaction in which different frequency components combine to produce radiation at their difference frequency.
The emitted terahertz waves came from a nonlinear polarization that developed on a femtosecond timescale. Measurements of the emission’s polarization and angular dependence indicated contributions from difference-frequency generation both without and with spatial inversion symmetry. The ratio of the corresponding susceptibilities—a measure of the material’s nonlinear response—was 58±4% for the former relative to the latter.
For 10-keV X-ray excitation, the generation efficiency in the 100-micrometre-thick crystal was about 1% of that produced by near-infrared light at 1.55 electronvolts. After accounting for interaction length, the intrinsic responses were comparable.
Why the result matters
The work establishes that hard X-ray free-electron-laser pulses can generate terahertz emission through a previously unobserved form of X-ray frequency mixing. That gives researchers a way to probe second-order nonlinear behavior and ultrafast polarization dynamics in solids using X-rays.
The findings also indicate that the process is not limited to materials lacking spatial inversion symmetry. The authors propose XFEL-induced terahertz emission as a general platform for studying these X-ray nonlinearities, although the reported experiment was carried out in zinc telluride.
Evidence and limits
This is an experimental study based on terahertz emission from a zinc telluride crystal exposed to 10-femtosecond, 10-keV hard X-ray pulses. The observed polarization and angular dependences, together with quantitative analysis of the response, support the interpretation as X-ray difference-frequency generation.
The reported measurements use a specific crystal thickness, material and X-ray energy, so the abstract does not establish how the efficiency or response will vary across other materials or experimental conditions. The reported efficiency was also lower than that obtained with near-infrared excitation in the same crystal, although the intrinsic response normalized by interaction length was comparable.