Climate & Environmentarticle2026-11-11

High-pressure impregnation and thermal stabilization of pine bark for reuse-oriented textile effluent polishing

Open access0 citations

Abstract

Reuse-oriented treatment of textile effluents requires polishing processes that remove residual colour without introducing secondary contamination or compromising downstream dyeing quality. In this study, pine bark, a forestry by-product, was converted into iron-functionalized materials for the polishing of textile wastewater and subsequent process-water reuse. Two impregnation routes, incipient wetness impregnation and high-pressure impregnation, were compared for loading 10 wt% Fe onto pine bark, followed by thermal stabilization under N₂/H₂ atmosphere to improve iron retention. Synthetic dye mixtures were first used as controlled screening systems, while real textile effluent was used to assess treatment performance under industrially relevant matrix conditions. High-pressure impregnation improved iron retention compared with incipient wetness impregnation; however, tests with real effluent showed that non-stabilized materials could release iron and operate partly through coagulation-assisted colour removal. Thermal treatment suppressed detectable iron release and identified the material prepared from granular pine bark by high-pressure impregnation at 150 MPa for 5 min as the best compromise between colour removal, iron stability, and treated-water quality. At an adsorbent dosage of 5.0 g/L, the optimized material achieved 83.5% colour removal from real textile wastewater after 24 h, with final colour below the reuse threshold defined for dyeing applications. Kinetic data were best described by the Elovich model, consistent with heterogeneous adsorption behaviour in a complex effluent matrix. Reuse trials showed that the treated effluent could replace up to 75% and 25% of freshwater in light-colour and dark-colour dyeing while maintaining acceptable colour quality and suggesting that forestry residues may serve as materials for wastewater polishing under the tested conditions. Adsorbent lifetime and fixed-bed operation were not established.

// Source

View paper (DOI)Open access versionOpenAlexJournal of Water Process EngineeringPublished 2026-11-11

Authors: Carlos A. Pinto, Ana L. Gonçalves, Jorge A. Saraiva, Olívia S.G.P. Soares, Cidália M. S. Botelho, Ricardo M. Ferreira

Institutions: Universidade do Porto, University of Aveiro, Centro Tecnológico das Indústrias Têxtil e do Vestuário de Portugal, LAQV Requimte