Engineering & Technologyarticle2026-11-16

Development of commingled hoop-wound composites-reinforced O-rings (CRO) for aeronautical application

Open access0 citations

Abstract

Abstract Traditional elastomeric O-rings, although widely employed in aerospace sealing applications, are often limited by its inadequate chemical resistance, thermal stability, mechanical resistance and durability under extreme operating conditions. This article proposes the development of high-performance composites for O-ring reinforcement using carbon fiber/polyether ether ketone and glass fiber/polyamide commingled technologies engineered to address current limitations by integrating elastomeric materials with continuous reinforcements tailored for the demanding environments of aerospace systems. A novel pre-compaction device (machine head) for commingled tows was designed and developed for using at filament winding technique, which was used to manufacture the reinforcement inner section of the O-rings. Final compaction level of commingled composites was carried out using compression molding to meet aeronautical requirements. The materials were characterized by SEM and thermal analysis as DSC. O-ring reinforcements made from 3D-printed carbon fiber/Onyx and glass fiber/Onyx by Markforged® printer were also manufactured and tested, indicating the improvement of O-rings performance when used commingled technology. Using 3D-printing resources, a hermetic mold was created to combine the composites reinforcement with the silicon-based elastomeric covering. Finally, composites reinforced O-rings were submitted to tensile testing, based on ASTM D2290 procedures, and a comparison of the resulting mechanical properties revealed superior performance of the commingled reinforcements.

// Source

View paper (DOI)Open access versionOpenAlexMechanics of Composite MaterialsPublished 2026-11-16

Authors: Thiago de Freitas SILVANO, Ricardo Mello Di Benedetto, Anderson Janotti, Rubens Augusto Carvalho Rafanhim, Túlio Hallak Panzera, Antônio Carlos Ancelotti

Institutions: University of Delaware, Universidade Federal de Itajubá, Federal University of São João del-Rei