Reverse Engineering Motion

Abstract

The Cohesion UFT is built by one method, and this paper states it. The method isreverse engineering: a motion is taken as observed, the mechanical cycle thatproduced it, Tension → Surplus → Torsion → Slip → Acceleration → Maintained Motion,is recovered stage by stage, and the cycle is then run forward to the number themotion measures. The papers of the series print the forward run, which is themathematics; the recovery that precedes it is where the results come from, and it isnot visible in the equations alone. The paper states the five primitives that make themechanics computable, the pressure axiom, the energy and inertia identities E = prand I = p, the funneled-spring geometry, the binary recursion toggle threshold Φt =32/(3π² − 4), and structural time, each as a mechanical definition that fixes a quantitythe procedure needs; sets the procedure out as six steps, of which the first fiverecover the mechanism and the sixth computes; and runs it on three cases of therecord: the pendulum clock, where the mechanism is known and the reading can bechecked part by part; the perihelion of Mercury, where the chain returns 42.98″ percentury against the measured 42.98″; and the fine-structure constant, where itreturns 137.029 against 137.036 with the residual identified and not computed. Itthen shows from the series' own papers that the method is the one the record wasbuilt by: the slip was read off the measured constant before the forward chain waswritten, the condition (nκ) eff = 3 was met at Mercury before it was identified with thecascade ratio, and structural time was defined on observed motion before it wasplaced under the recursion. The paper derives nothing and fits nothing. Its standing isan identification of method, and the standings of the quantities it cites areunchanged.