Seismic Response of Concrete Columns Reinforced with CFRP Bars and Spirals Under Near-Fault Ground Motions

Abstract

Carbon-fiber-reinforced polymer (CFRP) reinforcement is a potential alternative to steel in corrosive environments. However, CFRP is elastic without ductility, and the seismic performance of CFRP-reinforced concrete (RC) columns is inadequately understood. This study characterizes the intrinsic seismic response of concrete columns reinforced with CFRP cable-type bars and spirals under recorded near-fault ground motions. Three reference steel-RC columns are designed as seismic-resistant, non-seismic-resistant, and with post-cracking stiffness equivalent to the CFRP-RC column. The CFRP-RC and seismic-resistant steel-RC columns were tested under cyclic loading, and the results validated finite element (FE) models. Validated models simulated four columns under cyclic loading, and under 11 near-fault records matched to a capacity-derived elastic target spectrum. The results, bounded by selected ground motions and material constitutive models, show that: (1) The tested CFRP-RC column dissipated about 50% less energy than the steel-RC reference; (2) No material-level failure criterion was met under the suite, although peak base shears exceeded the nominal quasi-static capacities; (3) The CFRP-RC column developed the largest transient drift but minimal residual drift, whereas the steel-RC columns limited transient amplitude via hysteretic dissipation yet accumulated permanent offsets; (4) Response of the CFRP-RC column depends on ground motion energy delivery characteristics: concentration, symmetry, and duration.